EU-TUBE are designed to meet the stringent VDE specification for insulation and they are based on silicon extrusion. Using our clip mounted EU-TUBE a higher level of electrical isolation is achieved maintaining a good thermal performance.
The semiconductor is simply inserted into the tubes which provide an all–round shroud.
Our EU-TUBE accommodate most standard packages and retain the device ready for assembly.
|Thickness||0,5 mm (wall)||–|
|Thermal Conductivity||0.70 W/mK||MIL-I-49456A|
|Thermal Resistance per cm2||0.92 °C/W||–|
|Hardness||65 +- 5||Shore Micro|
|Tear Resistance||6,5 kN/m||ASTM D624|
|Tensile Strength||1,6 MPa||ASTM D 412|
|Dielectric Constant @1kHz||4,9||ASTM D150|
|Elongation||85 %||ASTM D150|
|Temperature Range||-60° to + 180°C||–|
|Remains resistant to cleaning agents, and does not support organic growth.|
|Low Thermal resistance with high voltage isolation|
|Fills air gaps between components up to 15% of the pads thickness|
|Complete encapsulation of components|
|No known deterioration over time|
|Used in conjunction with fixing spring-clips|
Euro Technologies offers a wide selection of products. Inside the general catalogue are described, each range, including its features and benefits, specifications, the available variants and possible applications.